Fabric pots

This DIY project couldn’t be easier. It’s simply a matter of gluing some pretty fabric onto a pot. Use a reasonably thick fabric otherwise the glue will show through. We used a spray adhesive, but any craft glue will do. You can pot these up and present them to Mum, but we suggest placing a slightly smaller plastic pot inside these terracotta pots. 1 hourproject

1. Cut a shape from your fabric, as shown, on the bias. Cutting on the bias gives the fabric some give when stretching it around the pots.
2. Spray or brush adhesive on both pot and fabric, as per manufacturer’s instructions. Stretch the fabric around the pot and press down firmly. Fold edges over the rim of pot and at the bottom. Smooth out any bubbles, pressing the fabric down until it sticks to the pot